Via Segrè 11/a 43122 Parma (I) (PR) Fax +39 (0)521-606278 +39 (0)521-606285 sr@salvatorerobuschi.com

01- RD (RDB-RDL-RDM)

Centrifugal pumps with closed impeller built according to ISO 2858-5199 norms.

Details

02- RG (RGB-RGL-RGM)

Centrifugal pumps with open impeller built according to ISO 2858-5199 norms.

Details

03- RC (RCB-RCL-RCM)

Centrifugal pump with vortex impeller in according to ISO 5199 norm.

Details

04- RB (RBB-RBL-RBM)

Centrifugal pumps with channel impeller according to ISO 5199 norm.

Details

05- HD (HDM-HDA)

Centrifugal pumps with closed impeller. Flanges unions PN 16 or DIN 11851 (food industry).

Details

06- HG (HGM-HGA)

Centrifugal pumps with semi-open impeller. Flanges unions PN 16 or DIN 11851 (food industry).

Details

07- RS (RSM-RSA)

Centrifugal pumps with vortex impeller. Flanges unions PN 16 or DIN 11851 (food industry).

Details

08- RN (RN-RNM-RNL)

Centrifugal pumps with closed impeller built in compliance with DIN 24255.

Details

09- TS (TS-TSK-TSL)

Multistage centrifugal pumps with closed impeller.

Details

10- RAM (RAMD-RAME)

Double-stage with peripheral impeller pumps.

Details

11- RACM

Multistage self-priming pumps.

Details

12- VERTICAL PUMPS

Vertical centrifugal pumps with closed, open, vortex and channel impeller according to ISO 5199 norm

Details

13- CANTILEVER PUMPS

Vertical cantilever centrifugal pumps with vortex and channel impeller.

Details
View all products

Vertical Pumps

RS Pumps

RG Pumps

RD Pumps

RC Pumps

RB Pumps

Process Pumps Range Execution

Process Pumps Features

Mechanical Seal Execution

HG Pumps

HD Pumps

Cantilever Pumps

View all videos

Chemical Transfer Pump

Chemical Industry

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. A chemical plant commonly has large vessels or sections called units or lines that are interconnected by piping which can carry streams of material. Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries.

Application : Chemical Transfer Pump

CHEMICAL TRANSFER PUMPS
PUMP: RCB 100-25A 4C22 C140 3
PERFORMANCE: Flow 151 m3/h – head 22 m
LIQUID: MEYCO 160 - viscosity 120 cP -s.g. 1,26

RC vortex impeller can pump liquid with a suspension of small solid particles without clogging problems. Back-to back seal arrangement allows the seals to work always in contact with clean liquids. Pumped liquid MEYCO SA160 is an high performance, alkali-free set accelerator for use in both wet and dry mix spraying processes.

RC SERIES

Impeller type: vortex.
Discharge sizes: from DN 32 to DN 250.
Maximum working pressure: 10 bar
Flow rate: up to 800 m3 /hr.
Differential head: up to 60 m.
Large free passage clearance up to 150 mm due to the completely recessed impeller.
Heavy duty shaft and bearings.
PDF

Backwashing

Conventional waste water treatment consists of a combination of physical, chemical, biological processes and operations to remove solids, organic matter and, sometimes, nutrients from waste water. General terms used to describe different degrees of treatment, in order to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced waste water treatment

Municipal Waste Water

Conventional waste water treatment consists of a combination of physical, chemical, biological processes and operations to remove solids, organic matter and, sometimes, nutrients from waste water. General terms used to describe different degrees of treatment, in order to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced waste water treatment

Wet scrubber

A wet scrubber operates by introducing the dirty gas stream with a scrubbing liquid – usually water. 
Particulate or gases are collected in the scrubbing liquid. Wet scrubbers are generally the most appropriate air pollution control device for collecting both particulate and gas in a single system.

Digester Feeding

Anaerobic digestion is the process by which organic
matter such as animal or food waste is broken down to
produce biogas and bio-fertilizer.
This process happens in the absence of oxygen in a
sealed, oxygen-free tank called anaerobic digester

Waste Water treatment plant

Anaerobic digestion is the process by which organic
matter such as animal or food waste is broken down to
produce biogas and bio-fertilizer.
This process happens in the absence of oxygen in a
sealed, oxygen-free tank called anaerobic digester

Multiple Effect Evaporator Plant

Vacuum evaporation plants are used for the concentration of thermolabile solutions or for the treatment of waste water produced by industries during the different stages of the process.

Waste water treatment plant

Conventional waste water treatment consists of a combination of physical, chemical, biological processes and operations to remove solids, organic matter and, sometimes, nutrients from waste water. General terms used to describe different degrees of treatment to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced waste water treatment

Digester Recirculation

Anaerobic digestion is the process by which organic
matter such as animal or food waste is broken down to
produce biogas and bio-fertilizer.
This process happens in the absence of oxygen in a
sealed, oxygen-free tank called anaerobic digester

Forced Circulation Evaporator

Vacuum evaporation plants are used for the concentration of thermolabile solutions or for the treatment of waste water produced by industries during the different stages of the process.

Multiple Effect Evaporator Plant

Vacuum evaporation plants are used for the concentration of thermolabile solutions or for the treatment of waste water produced by industries during the different stages of the process.

Waste Water treatment plant

Conventional waste water treatment consists of a combination of physical, chemical, biological processes and operations to remove solids, organic matter and, sometimes, nutrients from waste water. General terms used to describe different degrees of treatment to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced waste water treatment

Waste Water treatment

Conventional waste water treatment consists of a combination of physical, chemical, biological processes and operations to remove solids, organic matter and, sometimes, nutrients from waste water. General terms used to describe different degrees of treatment, in order to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced waste water treatment

Waste Water treatment

Conventional waste water treatment consists of a combination of physical, chemical, biological processes and operations to remove solids, organic matter and, sometimes, nutrients from waste water. General terms used to describe different degrees of treatment to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced waste water treatment

Waste Water treatment plant

Conventional waste water treatment consists of a combination of physical, chemical, biological processes and operations to remove solids, organic matter and, sometimes, nutrients from waste water. General terms used to describe different degrees of treatment to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced waste water treatment

Multiple Effect Forced Evaporator Plant

Tomato processing industry, mainly composed of tomato pastes, sauces and canned tomato products, is distinctly separate from the fresh-market industry.
Most of the volume of processed tomatoes is packaged as tomato paste. Packed in drums, the paste is usually shipped from the processing plant to other manufacturing sites

Multiple Effect Forced Evaporator Plant

Tomato processing industry, mainly composed of tomato pastes, sauces and canned tomato products, is distinctly separate from the fresh-market industry.
Most of the volume of processed tomatoes is packaged as bulk tomato paste. Packed in drums, the paste is usually shipped from the processing plant to other manufacturing sites

Receiving,washing and transport

Tomato Reception and Pre-Washing

Tomato processing industry, mainly composed of tomato pastes, sauces and canned tomato products, is distinctly separate from the fresh-market industry.
Most of the volume of processed tomatoes is packaged as bulk tomato paste. Packed in drums, the paste is usually shipped from the processing plant to other manufacturing sites

Receiving,washing and transport

Tomato processing industry, mainly composed of tomato pastes, sauces and canned tomato products, is distinctly separate from the fresh-market industry.
Most of the volume of processed tomatoes is packaged as tomato paste. Packed in drums, the paste is usually shipped from the processing plant to other manufacturing sites

Hot Oil Transfer

Deep-frying is a cooking process, through which water containing foodstuff is immersed into edible oils or fats at temperatures between 140 – 180 °C.In the first phase, within a few seconds, a thin crust forms, whose structure crucially affects the deep-frying process and the quality of the food with regards to fat absorption and crispness

Effluent tank Re-circulation

Tanning is the process of treating skins and hides of animals to produce leather, which is more durable and less susceptible to decomposition
Tanning involves a complex combination of mechanical and chemical processes.The heart of the process is the tanning operation itself in where organic or inorganic materials become chemically bound to the protein structure of the hide and preserve it from deterioration

Paper Factory Waste Water Treatment Plant

Paper is made by pulping wood, bleaching this pulp and then spreading it out into sheets to turn it into paper. At various stages of the process, chemicals are used to give the paper particular properties, such as the bleaching chemicals that make paper white (which also enable it to subsequently be coloured). Paper making is the process whereby pulp fibres are mechanically and chemically treated, turned into a diluted suspension, spread over a mesh surface, water removed by suction, and the resulting pad of cellulose fibres pressed and dried to form paper.

Ultrafiltration

The manufacture of stainless steel involves a series of processes. 
First, the steel is melted, and then it is casted into solid form. After various forming steps, the steel is heat treated then cleaned and polished to give it the desired finish.
Water is a crucial component at every stage of metal processing and finishing and large amounts of water are utilized throughout the entire process for cooling, washing, conditioning, lubricating, etching and plating.
Metal finishing entails a wide variety of processes which provide the surfaces of manufactured products with a number of desirable physical, chemical, and appearance qualities.

Condensate Effluent Tank

The manufacture of stainless steel involves a series of processes. 
First, the steel is melted, and then it is cast into solid form. After various forming steps, the steel is heat treated and then cleaned and polished to give it the desired finish.
Water is a crucial component at every stage of metal processing and finishing and large amounts of water are utilized throughout the entire process for cooling, washing, conditioning, lubricating, etching and plating.
Metal finishing entails a wide variety of processes which provide the surfaces of manufactured products with a number of desirable physical, chemical, and appearance qualities.

Ultrafiltration

The manufacture of stainless steel involves a series of processes. 
First, the steel is melted, and then it is cast into solid form. After various forming steps, the steel is heat treated and then cleaned and polished to give it the desired finish.
Water is a crucial component at every stage of metal processing and finishing and large amounts of water are utilized throughout the entire process for cooling, washing, conditioning, lubricating, etching and plating.
Metal finishing entails a wide variety of processes which provide the surfaces of manufactured products with a number of desirable physical, chemical, and appearance qualities.

Crude Oil Effluent Tank

Crude oil is made up of a mixture of hydrocarbons, and the distillation process aims to separate this crude oil into broad categories of its component hydrocarbons, or "fractions." Crude oil is first heated and then put into a distillation column, also known as a still, where different products boil off and are recovered at different temperatures
Refineries use complex processes to distil crude oil into fuels, such as gasoline, diesel, jet fuel and bunker oil, or raw materials for making plastics, solvents or detergents

Aviation Fuel loading System

Crude oil is made up of a mixture of hydrocarbons, and the distillation process aims to separate this crude oil into broad categories of its hydrocarbons component, or “fractions.” Crude oil is first heated and then put into a distillation column, also known as a still, where different products boil off and are recovered at different temperatures
Refineries use complex processes to distil crude oil into fuels, such as gasoline, diesel, jet fuel and bunker oil, or raw materials for making plastics, solvents or detergents

Dosing Station

Petrochemicals are products derived from hydrocarbon-based raw materials such oil or gas, which are referred to as feedstock
A petrochemical plant is designed to produce physical and chemical changes in feedstock and convert it into a desired products.
Products made from petrochemical include plastics, soaps, paints, solvents, fertilizer, rubbers, pesticides and synthetic fibers

Sump Unloading

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. 
A chemical plant commonly has usually large vessels or sections called units or lines that are interconnected by piping which can carry streams of material 
Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries. 

Chemical Transfer Pump

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. 
A chemical plant commonly has usually large vessels or sections called units or lines that are interconnected by piping which can carry streams of material 
Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries. 

Chemical Transfer Pump

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. 
A chemical plant commonly has large vessels or sections called units or lines that are interconnected by piping which can carry streams of material 
Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries. 

Chemical Transfer Pump

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. 
A chemical plant commonly has usually large vessels or sections called units or lines that are interconnected by piping which can carry streams of material 
Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries. 

Chemical Transfer Pump

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. 
A chemical plant commonly has large vessels or sections called units or lines that are interconnected by piping which can carry streams of material 
Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries. 


Pet Flakes Cleaning

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. 
A chemical plant commonly has large vessels or sections called units or lines that are interconnected by piping which can carry streams of material 
Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries. 

Liquid Dosing In Automatic Dissolving System

Textile or cloth is a flexible material consisting of a
network of natural or artificial fibres (yarn or thread).
All textiles are made up of fibres that are arranged in
different ways to create the desired strength, durability,
appearance and texture The core of textile manufacture
is fabric production. Fabrics can be created in many
different ways, the most common being weaving,
knitting or through production of non-woven fabrics.
During dyeing and printing both hazardous chemicals
and dyestuffs are used. Dyes used for dyeing, can also
be used for printing, but must then undergo the same
fixation and washings steps as after the dyeing process.

Multiple Effect Forced Evaporator Plant

Tomato processing industry, mainly composed of tomato pastes, sauces and canned tomato products, is distinctly separate from the fresh-market industry.

Most of the volume of processed tomatoes is packaged as tomato paste. Packed in drums, the paste is usually shipped from the processing plant to other manufacturing sites


Multiple Effect Forced Evaporator Plant

Tomato processing industry, mainly composed of tomato pastes, sauces and canned tomato products, is distinctly separate from the fresh-market industry. Most of the volume of processed tomatoes is packaged as bulk tomato paste. Packed in drums, the paste is usually shipped from the processing plant to other manufacturing sites.

Dirty Hot Oil Transfer

Deep-frying is a cooking process, with which water containing foodstuff is immersed into edible oils or fats at temperatures between 140 – 180 °C. In the first phase, within a few seconds, a thin crust forms, whose structure crucially affects the deep-frying process and the quality of the food with regards to fat absorption and crispness.

Tube in Tube Pasteurizer

Food processing is a way or technique implemented to convert raw food stuff into well-cooked and well preserved eatables for both the humans and the animals. All these methods are used by food processing industry to give out processed or preserved foods for our daily consumption. Following the techniques and methods are used to convert food into processed or preserved food: drying, smoking, sugaring, pickling, vacuum packs, salting and freezing.

Tunnel Pasteurizer

Food processing is a way or technique implemented to convert raw food stuff into well-cooked and well preserved eatables for both the humans and the animals. All these methods are used by food processing industry to give out processed or preserved foods for our daily consumption. Following the techniques and methods are used to convert food into processed or reserved food: drying, smoking, sugaring, pickling, vacuum packs, salting and freezing.

Single Effect Evaporator Unit

Vacuum evaporation plants are used for the concentration of thermolabile solutions or for the treatment of wastewater produced by industries during the different stages of the process.

CIP Cleaning in Place

Food processing is a way or technique implemented to convert raw food stuff into well-cooked and well preserved eatables for both the humans and the animals. All these methods are used by food processing industry to give out processed or preserved foods for our daily consumption. Following the techniques and methods are used to convert food into processed or preserved food: drying, smoking, sugaring, pickling, vacuum packs, salting and freezing.

Daf Unit

Conventional wastewater treatment consists of a combination of physical, chemical, and biological processes and operations to remove solids, organic matter and, sometimes, nutrients from wastewater. General terms used to describe different degrees of treatment, in order to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced wastewater treatment.

Grey Water Collecting Tank

Conventional waste water treatment consists of a combination of physical, chemical, biological processes and operations to remove solids, organic matter and, sometimes, nutrients from waste water. General terms used to describe different degrees of treatment in order to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced  waste water treatment.

Wet Scrubber

A wet scrubber operates by introducing the dirty gas stream with a scrubbing liquid – usually water. Particulate or gases are collected in the scrubbing liquid. Wet scrubbers are generally the most appropriate air pollution control device for collecting both particulate and gas in a single system.

Pretreatment for Painting

The manufacture of stainless steel involves a series of processes. First, the steel is melted, and then it is cast into solid form. After various forming steps, the steel is heat treated and then cleaned and polished to give it the desired finish. Water is a crucial component at every stage of metal processing and finishing and large amounts of water are utilized throughout the entire process for cooling, washing, conditioning, lubricating, etching and plating. Metal finishing entails a wide variety of processes which provide the surfaces of manufactured products with a number of desirable physical, chemical, and appearance qualities.

Ethanol Distillation

Biofuel is a fuel that is produced through biological processes and can be derived directly from plants, or indirectly from agricultural, commercial, domestic, and/or industrial wastes. Bioethanol is a natural product and is manufactured by the fermentation of plants containing sugar and starch: bioethanol is produced by distillation from crops such as wheat, corn, sugar cane and sugar beet. Biodiesel is a liquid biofuel obtained by chemical processes from vegetable oils or animal fats and an alcohol that can be used in diesel engines.

Ethanol Distillation

Biofuel is a fuel that is produced through biological processes and can be derived directly from plants, or indirectly from agricultural, commercial, domestic, and/or industrial wastes. Bioethanol is a natural product and is manufactured by the fermentation of plants containing sugar and starch: bioethanol is produced by distillation from crops such as wheat, corn, sugar cane and sugar beet. Biodiesel is a liquid biofuel obtained by chemical processes from vegetable oils or animal fats and an alcohol that can be used in diesel engines.

Stick Water Evaporation

Rendering is a process for separating fat from animal tissue. Rendering serves the invaluable function of converting what would be otherwise a waste materials into useful products. The remaining liquid from rendering process, called “stick water”, contains the protein materials. The stick water is typically evaporated and added to animal feed. Stick water from the rendering process is concentrated into a suitable dry product suitable for drying and hence a conversion to a saleable product.

Sump Pit Drain Pump

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. A chemical plant commonly has large vessels or sections called units or lines that are interconnected by piping which can carry streams of material. Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries.

Alcohol Production

Wine making is a natural process that requires little human intervention. In general, there are five basic components of the wine making process: harvesting, crushing and pressing, fermentation, clarification, and aging and bottling. Distilled beverage, spirit, liquor, hard liquor or hard alcohol is an alcoholic beverage produced by distillation of grains, fruit, or vegetables that have already gone through alcoholic fermentation. The distillation process purifies the liquid and removes diluting components like water, for the purpose of increasing its proportion of
alcohol content.

Cross-Flow Filtration

Wine making is a natural process that requires little human intervention. In general, there are five basic components of the wine making process: harvesting, crushing and pressing, fermentation, clarification, and aging and bottling. Distilled beverage, spirit, liquor, hard liquor or hard alcohol is an alcoholic beverage produced by distillation of grains, fruit, or vegetables that have already gone through alcoholic fermentation. The distillation process purifies the liquid and removes diluting components like water, for the purpose of increasing its proportion of
alcohol content.

Fabrics Washing Unit

Textile or cloth is a flexible material consisting of a network of natural or artificial fibers (yarn or thread). All textiles are made up of fibres that are arranged in different ways to create the desired strength, durability, appearance and texture The core of textile manufacture is fabric production. Fabrics can be created in many different ways, the most common being weaving, knitting or through production of non-woven fabrics. During dyeing and printing both hazardous chemicals and dyestuffs are used. Dyes used for dyeing, can also be used for printing, but must then undergo the same fixation and washings steps as after the dyeing process.

Cooling Water

Both a chiller and a cooling tower are used to remove heat from a liquid, used as a coolant in large devices. Chillers absorb heat from a coolant, which is fully contained in a cooling system. Chillers utilize compressors, evaporator and condenser heat exchangers. The condenser heat exchanger is the major component that rejects heat from the chillers to air. Cooling towers use evaporation cooling to cool condenser water from a chiller. The discharged water is then recycled back into the plant or discharged into the environment.

Floating Pump Station

Pits are used typically for collection and equalization of waste water flow from trenches or sewer lines before treatment or storage. They are usually quiescent and open to the atmosphere. In industry, individual drains may be dedicated to a single source or piece of equipment. Area drains will serve several sources and are located centrally among the sources or pieces of equipment that they serve. Lift stations are usually the last collection unit before the treatment system: Their main function is to lift the collected waste water to a treatment and/or storage system, usually by pumping or by use of a hydraulic lift.

Sugarcane Ethanol Distillation

Biofuel is a fuel that is produced through biological processes and can be derived directly from plants, or indirectly from agricultural, commercial, domestic, and/or industrial wastes. Bioethanol is a natural product and is manufactured by the fermentation of plants containing sugar and starch: bioethanol is produced by distillation from crops such as wheat, corn, sugar cane and sugar beet. Biodiesel is a liquid biofuel obtained by chemical processes from vegetable oils or animal fats and an alcohol that can be used in diesel engines.

Stick Water Evaporation

Rendering is a process for separating fat from animal tissue. Rendering serves the invaluable function of converting what would be otherwise a waste materials into useful products. The remaining liquid from rendering process, called “stick water”, contains the protein materials. The stick water is typically evaporated and added to animal feed. Stick water from the rendering process is concentrated into a suitable dry product suitable for drying and hence a conversion to a saleable product.

Stick Water Evaporation

Rendering is a process for separating fat from animal tissue. Rendering serves the invaluable function of converting what would be otherwise a waste materials into useful products. The remaining liquid from rendering process, called “stick water”, contains the protein materials. The stick water is typically evaporated and added to animal feed. Stick water from the rendering process is concentrated into a suitable dry product suitable for drying and hence a conversion to a saleable product.

Stick Water Evaporation

Rendering is a process for separating fat from animal tissue. Rendering serves the invaluable function of converting what would be otherwise a waste materials into useful products. The remaining liquid from rendering process, called “stick water”, contains the protein materials. The stick water is typically evaporated and added to animal feed. Stick water from the rendering process is concentrated into a suitable dry product suitable for drying and hence a conversion to a saleable product.

Alcohol Distillation

Biofuel is a fuel that is produced through biological processes and can be derived directly from plants, or indirectly from agricultural, commercial, domestic, and/or industrial wastes. Bioethanol is a natural product and is manufactured by the fermentation of plants containing sugar and starch: bioethanol is produced by distillation from crops such as wheat, corn, sugar cane and sugar beet. Biodiesel is a liquid biofuel obtained by chemical processes from vegetable oils or animal fats and an alcohol that can be used in diesel engines.

Cooling Water

Both a chiller and a cooling tower are used to remove heat from a liquid, which is used as a coolant in large devices. Chillers absorb heat from a coolant, which is fully contained in a cooling system. Chillers utilize compressors, evaporator and condenser heat exchangers. The condenser heat exchanger is the major component that rejects heat from the chillers to air. Cooling  towers use evaporation cooling to cool condenser water from a chiller. The discharged water is then recycled back into the plant or discharged into the environment.

Tunnel Pasteurizer

Food processing is a way or technique implemented to convert raw food stuff into well-cooked and well preserved eatables for both the humans and the animals. All these methods are used by food processing industry to give out processed or preserved foods for our daily consumption. Following the techniques and methods are used to convert food into processed or preserved food: drying, smoking, sugaring, pickling, vacuum packs, salting and freezing.

Chicken Slaughterhouse

Modern industrialized livestock agriculture is a fusion of primary (agriculture) and secondary (industry) activity. The greater part of the entire livestock industry is termed meat packing industry, the segment that handles the slaughtering, processing, packaging, and distribution . A great portion of the ever-growing meat branch in the food industry involves intensive animal farming in which livestock are kept almost entirely indoors or in restricted outdoor settings.

Tube in Tube Pasteurizer

Food processing is a way or technique implemented to convert raw food stuff into well-cooked and well preserved eatables for both the humans and the animals. All these methods are used by food processing industry to give out processed or preserved foods for our daily consumption. Following the techniques and methods are used to convert food into processed or preserved food: drying, smoking, sugaring, pickling, vacuum packs, salting and freezing.

Forced Evaporator Plant

Tomato processing industry, mainly composed of tomato pastes, sauces and canned tomato products, is distinctly separated from the fresh-market industry. Most of the volume of processed tomatoes is packaged as bulk tomato paste. Packed in drums, the paste is usually shipped from the processing plant to other manufacturing sites.

Vacuum Filler

Food processing is a way or technique implemented to convert raw food stuff into well-cooked and well preserved eatables for both the humans and the animals. All these methods are used by food processing industry to give out processed or preserved foods for our daily consumption. Following the techniques and methods are used to convert food into processed or preserved food: drying, smoking, sugaring, pickling, vacuum packs, salting and freezing.

Starch Production

<div>Food processing is a way or technique implemented to convert raw food stuff into well-cooked and well preserved eatables for both the humans and the animals. All these methods are used by food processing industry to give out processed or preserved foods for our daily consumption. Following the techniques and methods are used to convert food into processed or preserved food: drying, smoking, sugaring, pickling, vacuum packs, salting and freezing.</div>

Pet Food Production

Modern industrialized livestock agriculture is a fusion of primary (agriculture) and secondary (industry) activity. The greater part of the entire livestock industry is termed meat packing industry, the segment that handles the slaughtering, processing, packaging, and distribution. A great portion of the ever-growing meat branch in the food industry involves intensive animal farming in which livestock are kept almost entirely indoors or in restricted outdoor settings.

Pig Feeding

Modern industrialized livestock agriculture is a fusion of primary (agriculture) and secondary (industry) activity. The greater part of the entire livestock industry is termed meat packing industry, the segment that handles the slaughtering, processing, packaging, and distribution. A great portion of the ever-growing meat branch in the food industry involves intensive animal farming in which livestock are kept almost entirely indoors or in restricted outdoor settings.

Chicken Slaughterhouse

Modern industrialized livestock agriculture is a fusion of primary (agriculture) and secondary (industry) activity. The greater part of the entire livestock industry is termed meat packing industry, the segment that handles the slaughtering, processing, packaging, and distribution. A great portion of the ever-growing meat branch in the food industry involves intensive animal farming in which livestock are kept almost entirely indoors or in restricted outdoor settings.

Waste water treatment plant

Conventional waste water treatment consists of a combination of physical, chemical, biological processes and operations to remove solids, organic matter and, sometimes, nutrients from waste water. General terms used to describe different degrees of treatment to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced waste water
treatment.

Digestate Treatment by Evaporator

Anaerobic digestion is the process by which organic matter such as animal or food waste is broken down to produce biogas and bio-fertilizer. This process happens in the absence of oxygen in a sealed, oxygen-free tank called anaerobic digester.

Digestate Treatment by Evaporator

Anaerobic digestion is the process by which organic matter such as animal or food waste is broken down to produce biogas and bio-fertilizer. This process happens in the absence of oxygen in a sealed, oxygen-free tank called anaerobic digester.

Sump Pit Drain Pump

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. A chemical plant commonly has large vessels or sections called units or lines that are interconnected by piping which can carry streams of material. Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries.

Sump Pit Drain Pump

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. A chemical plant commonly has large vessels or sections called units or lines that are interconnected by piping which can carry streams of material. Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries.

Chemical Transfer Pump

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. A chemical plant commonly has large vessels or sections called units or lines that are interconnected by piping which can carry streams of material. Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries.

Chemical Transfer Pump

A chemical plant is an industrial process plant that manufactures chemicals product, usually on a large scale. A chemical plant has usually large vessels or sections called units or lines that are interconnected by piping which can carry streams of material. Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries.

Chemical Transfer Pump

A chemical plant is an industrial process plant that manufactures chemicals product, usually on a large scale. A chemical plant has usually large vessels or sections called units or lines that are interconnected by piping which can carry streams of material. Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries.

Chemical Transfer Pump

A chemical plant is an industrial process plant that manufactures chemicals, usually on a large scale. A chemical plant commonly has large vessels or sections called units or lines that are interconnected by piping which can carry streams of material. Such material streams can include fluids (gas or liquid carried in piping), sometimes solids or mixtures such as slurries.
Salvatore Robuschi e C. S.r.l. Via Segrè 11/a - 43122 - Parma (I) (PR) Tel. +39 (0)521-606285 Fax +39 (0)521-606278 E-Mail sr@salvatorerobuschi.com PEC salvatorerobuschi@pecwise.it
P.IVA 00738820349 - N° REA PR142953 Cap.sociale 93600.00 - Iscrizione CCIAA
Privacy & Cookies Policy Whistleblowing Powered By Blastertech s.n.c.

certifications:

compliance:

The graphics, images and texts on this site are subject to copyright by Salvatore Robuschi and C. S.r.l. and / or their respective owners and may not be reproduced or transmitted by any means, nor used in a professional or commercial context without permission written by Salvatore Robuschi and C. S.r.l. or legitimate owners.