TS
TS pumps, with multistage impeller, are suitable for clean or slightly dirty liquids and are used for boilers feeding, fire fighting plants, autoclaves, water supply systems, washing plants, irrigation, to pump hydrocarbons and whenever high pressures are required
Water pumps
Multistage impeller
Technical information
Seals
• TS 31 – 32 sizes are only available with mechanical seal.
• S 40 – 50 sizes are available both with mechanical seal or packing gland. Cooling chambers are supplied as standard.
Working limits
Maximum operating temperature is 105 °C with standard materials and seals. On demand, are available special seals and gaskets suitable for 140 °C in continuous duty.
• Maximum suction pressure 16 bar.
• Maximum discharge pressure 40 bar (according to the working temperature).
Easy maintenance
Ball bearings and mechanical seals can be replaced without disassembling the main group (shaft, impellers, diffusers and pump casings).
Discharge sizes
From DN 32 to DN 50.
Maximum working pressure
Up to 40 bar.
Flow Rate
Up to 45 m³/h.
Differential head
Up to 350 m.
Temperature
Up to 140°C.
Materials
Casing and diffusers in Cast Iron GJL250, shaft in AISI 420, bearing bushes in Bronze.
Upon request materials
AISI 316 shaft and special bearing bushes.
Flanges
EN 1092-2 PN16 (suction), EN 1092-2 PN40 (discharge).
TSB - TSKB pump
Independent frame with oil lubricated bearings, with ball bearing and bearing bush (TSB) or with double bearing (TSKB).
TSL - TSKL pump
Independent frame with oil lubricated bearings with lantern for coupling to flanged motors, with ball bearing and bearing bush (TSL) or with double bearing (TSKL).
Template Elem 1
Sub-1 Elem 1
Sub-1 Elem 2
Sub-2 Elem 1
Sub-2 Elem 2
Template Elem 2
Nosub Elem 1
Nosub Elem 2
TS pumps are mainly used in the following sectors
