Via Segrè 11/a 43122 Parma (I) (PR) Fax +39 (0)521-606278 +39 (0)521-606285

Aviation Fuel loading System

Crude Oil Derivative products: Jet Fuel

Crude oil is made up of a mixture of hydrocarbons, and the distillation process aims to separate this crude oil into broad categories of its hydrocarbons component, or “fractions.” Crude oil is first heated and then put into a distillation column, also known as a still, where different products boil off and are recovered at different temperatures
Refineries use complex processes to distil crude oil into fuels, such as gasoline, diesel, jet fuel and bunker oil, or raw materials for making plastics, solvents or detergents

Application : Aviation Fuel loading System

PUMP: RDM 32-20D 040 183 3
PERFORMANCE: Flow 12m3/h – head 30 m
LIQUID: jet fuel A-1

Pump is mounted on a heavy duty and fully galvanised steel skid.
RD process pump, in closed-coupled arrangement , is able to satisfy the high standard required for ATEX ZONE 1 classified area with a small footprint

Pumps are equipped with  mechanical seal designed to work under high vacuum condition 


Centrifugal pumps built according to ISO 2858/ISO 5199 norms.
Impeller type: closed.
Discharge sizes: from DN 32 to DN 125. 
Maximum working pressure: 16 bar.
Flow rate: up to 500 m3 /hr. 
Differential head: up to 140 m.
High hydraulic efficiencies and low NPSH value (investment casting impellers).

The graphics, images and texts on this site are subject to copyright by Salvatore Robuschi and C. S.r.l. and / or their respective owners and may not be reproduced or transmitted by any means, nor used in a professional or commercial context without permission written by Salvatore Robuschi and C. S.r.l. or legitimate owners.