Via Segrè 11/a 43122 Parma (I) (PR) Fax +39 (0)521-606278 +39 (0)521-606285


Waste Water Treatment

Conventional waste water treatment consists of a combination of physical, chemical, biological processes and operations to remove solids, organic matter and, sometimes, nutrients from waste water. General terms used to describe different degrees of treatment, in order to increase the treatment level, are preliminary, primary, secondary, and tertiary and/or advanced waste water treatment

Application: Backwashing

PUMP: RBB 200-35D 4C75 M181 1
PERFORMANCE: Flow 720m3/h – head 20 m
LIQUID: backwash water 

Treated water which was stored in a storage tank is pumped in the reverse direction as that of the water flow direction during filtration process
Backwashing is a form of preventive maintenance so that the filter media can be reused. For a filter to work efficiently during a filter run, regular backwashing is needed


Impeller type: channel.
Discharge sizes: from DN 65 to DN 300.
Maximum working pressure: 10 bar 
Flow rate: up to 2400 m3 /hr.
Differential head: up to 70 m.
Impeller with special blades geometry for low NPSH and high free passage.

The graphics, images and texts on this site are subject to copyright by Salvatore Robuschi and C. S.r.l. and / or their respective owners and may not be reproduced or transmitted by any means, nor used in a professional or commercial context without permission written by Salvatore Robuschi and C. S.r.l. or legitimate owners.