Via Segrè 11/a 43122 Parma (I) (PR) Fax +39 (0)521-606278 +39 (0)521-606285

Forced Circulation Evaporator

Vacuum Evaporation

Vacuum evaporation plants are used for the concentration of thermolabile solutions or for the treatment of waste water produced by industries during the different stages of the process.

Application : Forced Circulation Evaporator

PUMP:  RBB 125-25C 4C15 C181 7
PERFORMANCE: Flow 165 m3/h – head 15,5 m – NPSH 1 m
LIQUID: acid water with traces of chlorine

The pump is installed in a forced circulation wastewater evaporator to treat industrial wastewater. Its high efficiency enables treatment of effluents that are otherwise difficult to treat, such as brines, oily water, RO rejects, washing waters, etc
Pump is in duplex SAF 2205
The use of the vacuum evaporation technique allows to reduce not only the energy consumption, but also the NPSHa available for the pump.


Impeller type: channel.
Discharge sizes: from DN 65 to DN 300.
Maximum working pressure: 10 bar 
Flow rate: up to 2400 m3 /hr.
Differential head: up to 70 m.
Impeller with special blades geometry for low NPSH and high free passage.

The graphics, images and texts on this site are subject to copyright by Salvatore Robuschi and C. S.r.l. and / or their respective owners and may not be reproduced or transmitted by any means, nor used in a professional or commercial context without permission written by Salvatore Robuschi and C. S.r.l. or legitimate owners.